Vermeer MS300 Twin-Auger Manure Spreader – 300 cu ft, 540 RPM, 500/50R22.5 Tires [MS3660661]

Vermeer MS300 Twin-Auger Manure Spreader delivers a 300 cu ft (8.5 cu m) heaped capacity for demanding manure-handling applications. Built with twin vertical augers, a fully welded spreader body, boron auger flighting and heat-treated boron teeth, the MS300 is designed to process wet, heavy manure and distribute material across a maximum spread width of 52 ft (15.8 m). This configuration includes the optional 500/50-22.5 tire size, 540 rpm PTO operation, a vertical-lift endgate and a heavy-duty 80-grade floor chain, making it suited to agricultural operations that need substantial capacity and consistent spreading performance.

Key Features

• 300 cu ft heaped capacity: Provides substantial material capacity for manure-spreading operations.
• Twin vertical augers: Designed to handle wet, heavy manure and support a maximum spread width of 52 ft (15.8 m).
• Heavy-duty construction: Fully welded spreader body with a 0.2 in (5 mm) floor plate and 0.2 in (4 mm) side plates.
• Boron components: Boron auger flighting and heat-treated boron teeth are specified for the spreading mechanism.
• Vertical-lift endgate: Helps provide controlled operation at the rear of the spreader.
• Heavy-duty floor drive: RT350/50 floor drive with a 5/8 in (16 mm) floor chain.
• Convenient maintenance: Ground-level greasing points provide accessible service locations.
• Optional tire configuration: Supplied catalogue configuration identifies 500/50-22.5 tires; the standard tire size is 425/65 R22.5 New.

Performance and Operation

The MS300 uses a 540 rpm PTO operating configuration and is also specified for 1,000 rpm PTO capability. Its twin vertical augers are intended for wet, heavy manure applications, while the spreading system provides a maximum spread width of 52 ft (15.8 m). The spreader has a maximum net load of 19,000 lb (8,618.3 kg), subject to appropriate loading and operating conditions.

Hydraulic operation requires two double-acting hydraulic circuits and 20 gpm (80 L/min) hydraulic flow. The unit is specified with an 80 hp (59.7 kW) recommended PTO horsepower requirement. Confirm that the tractor meets the PTO, hydraulic, implement capacity and operating requirements before use.

Specifications

Tractor Requirements

The Vermeer MS300 requires a tractor with approximately 80 PTO hp recommended, a compatible 540 rpm PTO operating capability, two double-acting hydraulic circuits and hydraulic flow of 20 gpm (80 L/min). Vermeer also lists 1,000 rpm PTO capability. Verify tractor and implement compatibility, including hydraulic capacity and PTO requirements, before operation.