Vermeer MS300 Twin-Auger Manure Spreader – 300 cu ft, 1000 RPM, 500/50R22.5 Tires, Cleaning Covers [MS3674481]

The Vermeer MS300 Twin-Auger Manure Spreader is a 300-cu-ft manure spreader designed for demanding agricultural applications involving wet, heavy manure. Its twin vertical augers help deliver versatile, consistent spreading performance, while the fully welded body, heavy-duty floor chain, one-piece gearbox, and full-width floor slats support durable operation in the field. This supplied configuration is identified with a 1,000-rpm PTO and 500/50-22.5 tires, providing a high-capacity solution for tractors equipped with the required PTO and hydraulic systems.

Built for Wet, Heavy Manure

The MS300 uses twin vertical augers to process and distribute wet, heavy manure. Heat-treated boron teeth and boron auger flighting are designed for demanding material-handling conditions. A maximum spread width of 52 feet helps cover a broad area during field application, while the 300-cu-ft heaped capacity and 19,000-lb maximum net load support productive spreading cycles.

The spreader features a fully welded body with a 0.2-inch floor plate and 0.2-inch side plates. Its heavy-duty 80-grade floor chain, 5/8-inch chain size, RT350/50 floor drive, and full-width floor slats provide a robust material-handling system. The vertical-lift endgate helps manage the load during spreading, and ground-level greasing points simplify access for routine lubrication.

Key Features

• 300 cu ft (8.5 m³) heaped capacity
• 19,000-lb (8,618.3-kg) maximum net load
• Twin vertical augers for wet, heavy manure
• Supplied configuration identified with a 1,000-rpm PTO
• 52-ft (15.8-m) maximum spread width
• Boron auger flighting and heat-treated boron teeth
• Fully welded body
• Vertical-lift endgate
• Ground-level greasing points
• Heavy-duty 80-grade floor chain
• One-piece gearbox
• Full-width floor slats
• 500/50-22.5 tire size identified for this supplied product configuration

Tractor Requirements and Compatibility

The Vermeer MS300 is compatible with a tractor capable of providing either a 540-rpm or 1,000-rpm PTO, with this supplied variant identified as a 1,000-rpm PTO configuration. Vermeer specifies an 80-hp recommended PTO requirement. The tractor must also provide two double-acting hydraulic circuits and hydraulic flow of 20 gpm (80 L/min).

Transport and Dimensions

With standard tires, the MS300 has a transport width of 108 inches (274 cm). The machine has a total height of 103 inches (261.6–262 cm), a loading height of 71 inches (180.3–180 cm), and an inside bed measuring 59 inches (149.9–150 cm) wide, 37 inches (94 cm) deep at the top of the flare, and 165 inches (419.1–420 cm) long.

Specifications