NM Attachments - Class 2 Mechanical Weld-On Excavator Thumb - 3-Position Stiff Arm - AR400 Tines for Material Handling [NM-2MWO-2T]

NM Attachments 2MWO-2T Mechanical Weld-On Excavator Thumb is a two-tine attachment designed for excavators with a 3,000–6,000 lb operating-weight rating. Its weld-on mounting configuration provides a permanent attachment solution for material handling applications, helping operators grip, control, and move suitable loads with the excavator bucket. The mechanical design offers a straightforward alternative to hydraulic thumb systems where a fixed, manually positioned attachment is preferred.

Product Overview

The NM Attachments 2MWO-2T is a mechanical weld-on excavator thumb identified in the NM Attachments catalogue as model 2MWO-2T. It uses a two-tine configuration to work with the excavator bucket during handling tasks. As a weld-on attachment, it is intended to be permanently installed on the machine rather than connected through a quick-attach interface.

This excavator thumb can be suited to applications where the operator needs additional control when handling materials that may be difficult to retain with the bucket alone. The thumb and bucket work together to help secure suitable objects during lifting, positioning, and movement. Installation requires welding the attachment to the excavator in accordance with appropriate equipment and installation practices.

Key Features

• Manufactured by NM Attachments.
• Catalogue model: 2MWO-2T.
• Mechanical excavator thumb design.
• Weld-on mounting configuration.
• Two-tine configuration.
• Designed for excavators rated from 3,000 to 6,000 lb operating weight.
• Suitable for material handling applications based on the supplied product description.

Excavator Compatibility

The NM Attachments 2MWO-2T is listed for excavators with an operating weight of 3,000–6,000 lb. Confirm the excavator’s operating weight and mounting area before purchase. Because this is a weld-on attachment, the installation location, bucket geometry, available clearance, and suitability of the excavator structure should be checked before fitting.

This product is not identified as a hydraulic thumb in the verified catalogue information. No hydraulic flow, pressure, auxiliary circuit, or other hydraulic requirement is specified for this model.

Installation and Use

The weld-on mounting method requires the thumb to be attached directly to the excavator. Installation should be completed using suitable welding procedures and by personnel with the appropriate equipment and experience. Before use, inspect the welds, attachment structure, bucket interaction, and clearance through the intended operating range.

Use the thumb only within the excavator manufacturer’s rated lifting and operating limits. The two tines are intended to work with the bucket for handling suitable materials and objects; the attachment should not be used to exceed the machine’s capacity or for applications outside the excavator and attachment ratings.

Specifications

Important Fitment Information

Check the excavator’s operating-weight rating and confirm that the machine, bucket, and proposed weld-on installation are suitable for this attachment before ordering. The verified product information does not specify attachment dimensions, weight, tine spacing, or installation measurements, so these details should be confirmed for the intended excavator before fabrication or fitting.