NM Attachments - 30" Class 3 Heavy-Duty Spade-Tooth Bucket - 8 Spade Teeth - 4.875 cu ft, AR400 Wear Areas [NM-3HD-30S]

NM Attachments NM-3HD-30S 30" Class 3 Heavy-Duty Spade-Tooth Bucket is a heavy-duty excavator bucket from NM-Attachments, configured with eight spade teeth, a 4.875 cu ft capacity, and AR400 wear areas. Designed for excavators in the approximately 3–5 ton, 6,000–10,000 lb carrier class, this 30-inch bucket provides a practical combination of digging width, tooth penetration, and wear resistance for general excavation and material-handling work. The bucket must be ordered with the correct OEM coupler or pin-on mounting configuration for the carrier machine.

Product Features

The NM-3HD-30S is part of NM Attachments’ Class 3 heavy-duty bucket family. Its 30-inch nominal width is suited to compact and mid-size excavators within the specified carrier range, while the spade-tooth configuration is intended to support digging performance in applicable ground conditions. AR400 wear areas provide reinforced protection in critical contact zones, helping the bucket withstand demanding use.

• Manufactured by NM Attachments
• Class 3 heavy-duty excavator bucket
• 30-inch nominal working and transport width
• Eight spade teeth
• 4.875 cu ft bucket capacity
• AR400 wear areas in critical wear locations
• For excavators in the 6,000–10,000 lb carrier class, approximately 3–5 tons
• Available mounting configuration must be specified as OEM coupler or pin-on

Built for Heavy-Duty Excavator Use

NM bucket family information identifies high-strength steel construction with AR400 wear plates in critical wear areas. On the NM-3HD-30S, this construction is paired with a spade-tooth cutting configuration and an 8-tooth layout. The 4.875 cu ft capacity provides useful bucket volume while maintaining a 30-inch working width for Class 3 excavator applications.

The compact width can be useful where controlled excavation access is important, including work areas where a narrower attachment is preferred over a wider general-purpose bucket. Actual performance depends on the excavator, ground conditions, coupler or pin-on setup, and the application.

Specifications

Compatibility and Mounting

The NM-3HD-30S is intended for excavators in the 6,000–10,000 lb carrier class, approximately 3–5 tons. Before ordering, confirm the excavator’s carrier weight and the required attachment interface. This bucket is configured for either an OEM coupler or a pin-on mounting arrangement, and the correct mounting specification must be provided to match the machine.

Ordering Information

When requesting the NM-3HD-30S, provide the excavator make and model together with the required OEM coupler or pin-on configuration. Confirming the mounting details before purchase helps ensure the bucket is supplied for the intended Class 3 excavator application.