HLA Attachments - 84" Standard Telehandler Bucket [LA-THMB84BO500]

HLA Attachments THMB84BO500 84-inch Standard Telehandler Bucket is a robust material-handling bucket designed for telescopic handlers and compatible loader carriers using the specified BO500 quick-attach configuration. With an 84-inch inside width, 1.47-cubic-yard struck capacity, and 1.82-cubic-yard SAE heaped capacity, it provides practical volume for moving bulk materials. Its reinforced top lip, heavy beveled cutting edge, and substantial end plates support demanding loading and handling applications.

Built for Material Handling

The THMB84BO500 combines HLA Attachments’ THMB84 standard telescopic-handler bucket with a BO500 quick-attach mount. The bucket measures 43 inches deep and 35 inches high, providing a useful balance of capacity and dimensions for general material movement. HLA specifies an 84-inch inside width and advises adding two inches to determine outside width, resulting in an approximately 86-inch overall width.

The main bucket material is 3/16 inch thick, while the 1/4-inch end plates provide additional strength along the sides. A reinforced top lip helps support the upper bucket structure during loading and carrying. These construction details make the bucket suitable for routine bulk-material handling where capacity, durability, and a wide working area are important.

Heavy-Duty Cutting Edge

A 3/4-by-6-inch beveled cutting edge is fitted as standard. The bucket is also drilled to accept a standard bolt-on cutting edge, allowing the wear surface to be supplemented when required. An optional 3/4-by-8-inch double-bevel bolt-on cutting edge is available for applications where an additional replaceable wear edge is preferred.

Key Features

• 84-inch inside bucket width
• Approximately 86-inch outside width
• 1.47-cubic-yard struck capacity
• 1.82-cubic-yard SAE heaped capacity
• 3/16-inch bucket material
• 1/4-inch end plates
• Reinforced top lip for added structural support
• Standard 3/4-by-6-inch beveled cutting edge
• Drilled for a standard bolt-on cutting edge
• Optional 3/4-by-8-inch double-bevel bolt-on cutting edge
• BO500 quick-attach mounting configuration

BO500 Quick-Attach Compatibility

This configured model uses the HLA BO500 quick-attach mount. HLA identifies BO500 as a quick-attach code used for skid-steer-style carriers across multiple loader brands and models. However, quick-attach geometry can differ between machines and carrier systems. Compatibility with a particular telehandler or loader must therefore be confirmed against the machine’s carrier geometry before ordering or installation.

When checking fitment, verify the complete mount interface rather than relying only on the general description of the carrier style. This product is the BO500-mounted configuration of the THMB84 base bucket.

Specifications

Weight note: The approximately 1,045-pound figure is published for the THMB84 base bucket. A separate verified weight for the BO500-mounted configuration is not specified.