11,000 LB SKIDDING WINCH

The Wallenstein FX110 11,000 LB Skidding Winch is a PTO-driven tractor-mounted winch designed for demanding log skidding work. With an 11,000 lb (4,989 kg) pulling capacity, a durable steel cable, and manual control through a mechanical dry-disc clutch, the FX110 provides a practical solution for moving logs with tractors in the 50–90 engine HP range. Its Category I and Category II 3-point hitch mounting supports compatibility with a broad range of suitable tractors, while the included choker chains and keyhole sliders help secure and attach loads for forestry and property-maintenance applications.

Wallenstein FX110 Skidding Winch Features

The FX110 combines tractor PTO power with a mechanical winch system for controlled log recovery and skidding. The 540 rpm PTO input drives the winch, while the mechanical dry-disc clutch supports the winch’s manual-control operation. Its 165 ft (50 m) steel cable provides useful reach between the tractor and the load, and the 11,000 lb capacity is suited to substantial skidding tasks when used with a properly matched tractor and appropriate equipment.

• 11,000 lb (4,989 kg) pulling capacity for demanding skidding applications
• PTO-driven operation with a 540 rpm PTO input speed
• Manual control for straightforward winch operation
• Mechanical dry-disc clutch winch type
• Steel cable measuring 165 ft (50 m) in length
• 7/16 in (11 mm) cable diameter
• Two choker chains included for load attachment
• Two keyhole sliders for cable attachment
• Category I and Category II 3-point hitch mounting
• 98–253 ft/min (30–77 m/min) line speed
• Designed for tractors producing 50–90 engine HP

Built for Tractor-Mounted Skidding

The Wallenstein FX110 is intended for use as a tractor-mounted PTO skidding winch. Its 3-point hitch mounting system supports Category I and Category II tractors, while the 21 in (53 cm) PTO height and compact transport width of 51 in (130 cm) provide key dimensions for assessing tractor and access compatibility. The winch weighs 796 lb (361 kg), so the tractor’s lifting capacity, stability, and operating suitability should be considered before use.

The included steel cable, two choker chains, and two keyhole sliders provide the primary cable and load-attachment equipment specified for the FX110. The winch has a listed line speed of 98–253 ft/min (30–77 m/min), allowing the cable to be managed across a range of operating conditions.

Specifications

Tractor Requirements

The FX110 is designed for tractors with 50–90 engine HP, a 540 rpm PTO, and a Category I or Category II 3-point hitch. Confirm that the tractor can safely support and operate a 796 lb (361 kg) mounted implement and that the tractor and winch configuration are suitable for the intended skidding work.