HLA Attachments - 66" Scrap Grapple Bucket - Hydraulic Material Handling [LA-SGB66BO500]

The HLA Attachments SGB66BO500 66-inch Scrap Grapple Bucket is a heavy-duty hydraulic material-handling attachment built for awkward, abrasive loads. Its two independently operating grapple sections help secure uneven material across the bucket, while the 66-inch inside width and 18.9-cubic-foot SAE heaped capacity provide ample room for bulky debris. Constructed with 1/4-inch bucket material, 3/8-inch end plates, and a substantial beveled cutting edge, this grapple bucket is suited to demanding cleanup, sorting, loading, and material-handling work. The BO500 universal skid-steer quick-attach interface allows use with compatible skid-steer-style loader carriers.

Built for Difficult Material-Handling Jobs

Loose scrap, irregular debris, and other bulky loads can be difficult to control with a conventional bucket. The SGB66 addresses this challenge with two independent hydraulic grapple sections. Each section can operate against the load separately, helping the attachment conform to uneven material and maintain control while moving, lifting, or loading it.

The bucket offers a struck capacity of 14.5 cubic feet and an SAE heaped capacity of 18.9 cubic feet. Its 66-inch inside width provides a practical working area for collecting material, while the 31-inch overall height and 34-inch overall depth create a compact but capable bucket profile.

Heavy-Duty Bucket Construction

HLA equips the SGB66 with 1/4-inch bucket material and 3/8-inch end plates for work involving abrasive and awkward loads. A 3/4-by-6-inch beveled cutting edge reinforces the bucket’s leading edge and supports effective material pickup. The bucket is also drilled for a standard bolt-on cutting edge, providing a replaceable-edge provision for ongoing service.

Two 2-1/2-by-8-inch hydraulic cylinders operate the independent grapple sections. Loader auxiliary hydraulics are required to power these cylinders.

Key Features

• 66-inch inside bucket width
• Two independently operating grapple sections for securing uneven loads
• Designed for awkward, abrasive material
• 14.5-cubic-foot struck capacity
• 18.9-cubic-foot SAE heaped capacity
• Heavy-duty 1/4-inch bucket material
• 3/8-inch end plates
• 3/4-by-6-inch beveled cutting edge
• Drilled for a standard bolt-on cutting edge
• Two 2-1/2-by-8-inch hydraulic cylinders
• BO500 universal skid-steer quick-attach interface
• Approximately 1,080 lb

Compatibility

This SGB66 configuration uses HLA mounting code BO500, which identifies a universal skid-steer-style quick-attach interface. It is intended for loaders equipped with a compatible skid-steer quick-attach carrier.

HLA lists the BO500 interface across multiple loader brands and models. Carrier fit, loader capacity, and auxiliary hydraulic suitability should be confirmed for the specific machine before ordering. Hydraulic flow and pressure requirements are not published for this model.

Loader Requirements

• A compatible universal skid-steer-style quick-attach carrier is required.
• Loader auxiliary hydraulics are required to operate both grapple cylinders.
• The loader must have adequate operating capacity for the attachment’s approximate 1,080-pound weight plus the intended load.
• Confirm machine hydraulic capacity and attachment fit before purchase.

Specifications