{"title":"NM Excavator Rakes \u0026 Frost Rippers","description":"\u003cp\u003eShop NM excavator root rakes, hybrid rakes and frost rippers for land clearing, brush removal, roots, rock and difficult ground. These heavy-duty attachments are well suited to contractors, farms, acreages and land-clearing operators working in the varied terrain of the Okanagan and Interior British Columbia.\u003c\/p\u003e","products":[{"product_id":"nm-attachments-class-2-frost-ripper-single-tooth-19-penetration-ar400-ripping-tine-side-wear-plates-nm-2fr-19","title":"NM Attachments - Class 2 Frost Ripper - Single Tooth, 19\" Penetration - AR400 Ripping Tine \u0026 Side Wear Plates [NM-2FR-19]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments Class 2 Frost Ripper – Single Tooth, 19 in Penetration\u003c\/strong\u003e is a heavy-duty excavator attachment designed for serious prying and ripping in frost or rock. Model NM-2FR-19 combines a single-tooth configuration with a stated 19 in penetration depth, an extra-thick AR400 steel ripping tine, and AR400 steel side wear plates for demanding ground-engagement work. Its Class 2 excavator mounting category and standard CAT-style tooth configuration make it suited to compatible excavators used for breaking through frozen or hard ground, loosening rock, and preparing difficult material for excavation.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Frost and Rock Ripping\u003c\/h2\u003e\n\u003cp\u003eThe NM-2FR-19 is part of the NM Attachments Frost Ripper family, developed for applications where conventional digging can be slowed by frost or rock. The single ripping tooth concentrates working force into a narrow contact area to support prying and penetration. The extra-thick AR400 ripping tine is designed for heavy ground contact, while the AR400 side wear plates provide reinforced protection along the attachment’s sides during demanding use.\u003c\/p\u003e\n\n\u003cp\u003eThis model is identified as a Class 2 excavator attachment with 19 in of stated penetration. The standard CAT-style tooth configuration supports the use of the specified tooth arrangement, and the Frost Ripper range offers various tooth options. This catalogue variant is supplied as a single-tooth model.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNM Attachments Frost Ripper, model NM-2FR-19\u003c\/li\u003e\n  \u003cli\u003eClass 2 excavator mounting category\u003c\/li\u003e\n  \u003cli\u003eSingle-tooth configuration\u003c\/li\u003e\n  \u003cli\u003e19 in stated penetration\u003c\/li\u003e\n  \u003cli\u003eExtra-thick AR400 steel ripping tine\u003c\/li\u003e\n  \u003cli\u003eAR400 steel side wear plates\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style tooth configuration\u003c\/li\u003e\n  \u003cli\u003eDesigned for serious prying and ripping in frost or rock\u003c\/li\u003e\n  \u003cli\u003eVarious tooth options available within the Frost Ripper range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eUse the NM-2FR-19 for focused ripping and prying work in frozen ground and rock. Its single-tooth design is suited to breaking into difficult material, loosening hard ground, and creating a starting point for subsequent excavation. The reinforced AR400 components are intended for demanding attachment use where the ripping tine and side surfaces are exposed to abrasive ground contact.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-2FR-19\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator frost ripper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMounting category\u003c\/th\u003e\n      \u003ctd\u003eClass 2 excavator attachment\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eSingle tooth\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eStated penetration\u003c\/th\u003e\n      \u003ctd\u003e19 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eRipping tine material\u003c\/th\u003e\n      \u003ctd\u003eExtra-thick AR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSide wear plate material\u003c\/th\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration standard\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePrimary application\u003c\/th\u003e\n      \u003ctd\u003eSerious prying and ripping in frost or rock\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility and Mounting\u003c\/h2\u003e\n\u003cp\u003eThe NM-2FR-19 is identified for the Class 2 excavator mounting category. The supplied catalogue record includes an excavator 1.7 t tag; manufacturer compatibility for this exact model has not been separately published. Confirm that the excavator’s mounting arrangement is compatible with a Class 2 attachment before ordering or installation. Exact hitch dimensions are not published.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463591579705,"sku":"NM-2FR-19","price":1164.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/b478e7a7-8e9f-4e17-9709-e2fb42002977.png?v=1788822644"},{"product_id":"nm-attachments-48-class-8-hybrid-rake-5-tines-root-rake-design-with-sifting-crossbars-replaceable-teeth-nm-8hr-48","title":"NM Attachments - 48\" Class 8 Hybrid Rake - 5 Tines - Root-Rake Design with Sifting Crossbars \u0026 Replaceable Teeth [NM-8HR-48]","description":"\u003cp\u003e\u003cstrong\u003eNM-Attachments 48\" Class 8 Hybrid Rake – NM-8HR-48\u003c\/strong\u003e is an excavator-mounted root rake designed for carriers in the 14,000–24,000 lb class. Combining five tines with a root-rake layout, this attachment is suited to moving and loading brush, trees, stumps, and similar material while helping separate soil and debris through its sifting crossbars. The 48-inch hybrid rake is a practical choice for land clearing, site preparation, root and rock removal, and general material handling where controlled collection and screening are useful.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe NM-8HR-48 is a Class 8 hybrid rake from NM Attachments, identified by the manufacturer model reference \u003cstrong\u003eNM8HR-48\u003c\/strong\u003e. Its 48-inch working width provides a focused collection area for excavator-based clearing work, while the five-tine root-rake design helps engage and move vegetation, roots, stumps, and related ground material.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated sifting crossbars support the hybrid rake’s ability to retain larger material while allowing loose soil and smaller debris to fall through. This makes the attachment useful when clearing areas where the operator needs to gather unwanted vegetation and material without simply scooping up everything in the working path. Replaceable teeth are included in the product designation, supporting serviceability when tooth replacement is required.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eManufactured by NM Attachments.\u003c\/li\u003e\n  \u003cli\u003e48-inch working and transport width.\u003c\/li\u003e\n  \u003cli\u003eClass 8 excavator attachment.\u003c\/li\u003e\n  \u003cli\u003eFive-tine configuration.\u003c\/li\u003e\n  \u003cli\u003eRoot-rake design for clearing and material handling.\u003c\/li\u003e\n  \u003cli\u003eSifting crossbars for separating soil and smaller debris from collected material.\u003c\/li\u003e\n  \u003cli\u003eReplaceable teeth.\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators and carriers in the 14,000–24,000 lb class.\u003c\/li\u003e\n  \u003cli\u003eSuitable for moving and loading brush, trees, stumps, and similar material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis hybrid rake is intended for excavator-mounted clearing and removal tasks. Typical uses include brush removal, tree and stump handling, root and rock removal, land clearing, and site preparation. The rake configuration allows the operator to engage and collect larger organic or ground material, while the sifting crossbars help reduce the amount of loose soil carried with the load.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM-Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-8HR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eManufacturer model\u003c\/th\u003e\n      \u003ctd\u003eNM8HR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator hybrid rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n      \u003ctd\u003eExcavator mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eClass\u003c\/th\u003e\n      \u003ctd\u003eClass 8\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTransport width\u003c\/th\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTines\u003c\/th\u003e\n      \u003ctd\u003e5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eDesign\u003c\/th\u003e\n      \u003ctd\u003eRoot-rake design with sifting crossbars and replaceable teeth\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility and Carrier Requirements\u003c\/h2\u003e\n\u003cp\u003eThe NM-8HR-48 is intended for \u003cstrong\u003eexcavators and carriers in the 14,000–24,000 lb class\u003c\/strong\u003e. Confirm that the excavator’s attachment interface is suitable for this excavator-mounted rake before purchase or installation. Hydraulic requirements and additional attachment-interface specifications are not specified for this exact variant.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463591940153,"sku":"NM-8HR-48","price":6374.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/16041592-9e1b-4601-bd35-1fc715d68a53.png?v=1788822645"},{"product_id":"nm-attachments-36-class-3-root-rake-6-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-3rr-36","title":"NM Attachments - 36\" Class 3 Root Rake - 6 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-3RR-36]","description":"\u003cp\u003eClear brush, roots, stumps, and unwanted vegetation with the \u003cstrong\u003eNM Attachments 3RR-36 Class 3 Root Rake\u003c\/strong\u003e. Built with a 36-inch working width and six tines, this excavator attachment is designed for controlled material removal and site cleanup on excavators weighing approximately 6,000–10,000 lb. Its high-grade structural steel construction includes AR-400 steel in the tine areas for demanding clearing work, while the standard CAT-style teeth configuration supports practical digging, raking, and loading applications. Use it for fence-line clearing, orchard removal, land maintenance, brush management, and similar work where roots and woody debris need to be gathered or moved.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 3RR-36 is a Class 3 excavator root rake developed for moving and loading unwanted brush, trees, stumps, roots, and related material. Its 36-inch working width provides a focused footprint for working in confined areas, along fence lines, around orchard rows, and through areas requiring selective clearing.\u003c\/p\u003e\n\n\u003cp\u003eThe rake uses six tines to engage and separate roots, brush, and other debris from the working surface. AR-400 steel is used in the tine areas, combined with high-grade structural steel construction, to provide a durable attachment design for regular clearing and cleanup tasks. The standard CAT-style teeth configuration is suited to general-purpose use, and various teeth options are available.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e36-inch working width for focused excavator clearing work\u003c\/li\u003e\n  \u003cli\u003eSix-tine root rake configuration\u003c\/li\u003e\n  \u003cli\u003eClass 3 design\u003c\/li\u003e\n  \u003cli\u003eHigh-grade structural steel construction\u003c\/li\u003e\n  \u003cli\u003eAR-400 steel in the tine areas\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style teeth configuration\u003c\/li\u003e\n  \u003cli\u003eVarious teeth options available\u003c\/li\u003e\n  \u003cli\u003eDesigned for moving and loading brush, trees, stumps, roots, and similar material\u003c\/li\u003e\n  \u003cli\u003eSuitable for fence-line and orchard removal applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe 3RR-36 is intended for excavator operators who need to clear and collect unwanted vegetation and woody material. The six-tine layout can be used for gathering brush, working around roots, and moving debris after trees or stumps have been removed. Its application range includes fence-line clearing, orchard removal, brush cleanup, root removal, and general land-maintenance work.\u003c\/p\u003e\n\n\u003cp\u003eWith its compact 36-inch width, the root rake is suited to targeted work where a narrower attachment can help maintain control around established rows, boundaries, and other restricted work areas. It can also be used for loading and moving cleared material as part of a broader excavation or site-preparation workflow.\u003c\/p\u003e\n\n\u003ch2\u003eConstruction and Tooth Configuration\u003c\/h2\u003e\n\u003cp\u003eNM Attachments builds its root rakes from high-grade structural steel, with AR-400 steel used in the tine areas. The attachment features a standard CAT-style teeth configuration. Various teeth options are available, allowing the attachment configuration to be matched to the intended clearing work.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and Tractor Requirements\u003c\/h2\u003e\n\u003cp\u003eThis is an excavator attachment, not a tractor implement. The 3RR-36 is intended for excavators approximately 3–5 tons in operating class, including excavators weighing approximately 6,000–10,000 lb. Confirm the attachment interface and machine suitability before use.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator root rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003e3RR-36\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-3RR-36\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eClass\u003c\/th\u003e\n      \u003ctd\u003eClass 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e36 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eNumber of tines\u003c\/th\u003e\n      \u003ctd\u003e6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConstruction material\u003c\/th\u003e\n      \u003ctd\u003eHigh-grade structural steel with AR-400 steel in the tine areas\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth configuration; various teeth options available\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMachine compatibility\u003c\/th\u003e\n      \u003ctd\u003eExcavators approximately 3–5 tons; excavators weighing approximately 6,000–10,000 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463592497209,"sku":"NM-3RR-36","price":3110.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/6d4f8d1a-f374-4e6c-89bd-6c43aed40706.png?v=1788822649"},{"product_id":"nm-attachments-36-class-3-hybrid-rake-6-tines-root-rake-design-with-sifting-crossbars-replaceable-teeth-nm-3hr-36","title":"NM Attachments - 36\" Class 3 Hybrid Rake - 6 Tines - Root-Rake Design with Sifting Crossbars \u0026 Replaceable Teeth [NM-3HR-36]","description":"\u003cp\u003eThe \u003cstrong\u003eNM Attachments 36\" Class 3 Hybrid Rake\u003c\/strong\u003e combines a root-rake design with integrated sifting crossbars to help clear roots, limbs, brush, rocks, and other debris while leaving soil behind. Model \u003cstrong\u003eNM3HR-36\u003c\/strong\u003e features six tines, partial enclosed sides, strengthened side plates, and replaceable teeth for practical excavator attachment performance in site clearing, landscaping, land reclamation, and debris separation applications. Its 36-inch working width is designed for Class 3 excavator mounts and carriers in the approximately 6,000–10,000 lb range.\u003c\/p\u003e\n\n\u003ch2\u003eRoot Rake and Sifting Functionality\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments Hybrid Rake is designed to perform more than basic raking. Its root-rake configuration helps engage and gather roots, limbs, brush, and rocks, while the added crossbars provide finer sifting capability. This combination allows loose soil to pass through more readily as larger unwanted material is collected, helping support clearing work where separating debris from soil is important.\u003c\/p\u003e\n\n\u003ch2\u003eReinforced Construction\u003c\/h2\u003e\n\u003cp\u003ePartial enclosed sides help contain collected material during operation, while strengthened side plates provide additional structural support for the attachment. The rake comes standard with replaceable teeth, allowing worn teeth to be replaced without replacing the complete attachment. The six-tine configuration provides a practical balance between material engagement and separation for compatible excavator carriers.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e36-inch Class 3 excavator hybrid rake\u003c\/li\u003e\n  \u003cli\u003eSix-tine configuration\u003c\/li\u003e\n  \u003cli\u003eRoot-rake design for clearing roots, limbs, brush, and rocks\u003c\/li\u003e\n  \u003cli\u003eSifting crossbars for finer material separation\u003c\/li\u003e\n  \u003cli\u003ePartial enclosed sides to help retain collected debris\u003c\/li\u003e\n  \u003cli\u003eStrengthened side plates for added support\u003c\/li\u003e\n  \u003cli\u003eReplaceable teeth included as standard\u003c\/li\u003e\n  \u003cli\u003eDesigned to help leave soil behind while removing larger debris\u003c\/li\u003e\n  \u003cli\u003eSuitable for excavator carriers approximately 6,000–10,000 lb (2.7–4.5 t)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eUse the NM3HR-36 for excavator-based clearing and material separation tasks where a conventional bucket or open rake may not provide the required combination of gathering and sifting. The hybrid design is suited to removing roots, brush, limbs, and rocks while allowing soil to fall through the crossbar openings. It can support landscaping, property clearing, site preparation, land reclamation, and general debris-cleanup work within the attachment’s compatible carrier class.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator hybrid rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003eNM3HR-36\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-3HR-36\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e36 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTransport width\u003c\/th\u003e\n      \u003ctd\u003e36 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eExcavator class\u003c\/th\u003e\n      \u003ctd\u003eClass 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine count\u003c\/th\u003e\n      \u003ctd\u003e6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eDesign\u003c\/th\u003e\n      \u003ctd\u003eHybrid rake combining root-rake functionality with sifting capability\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSifting system\u003c\/th\u003e\n      \u003ctd\u003eAdded crossbars for finer sifting\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSide construction\u003c\/th\u003e\n      \u003ctd\u003ePartial enclosed sides with strengthened side plates\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTeeth\u003c\/th\u003e\n      \u003ctd\u003eReplaceable teeth supplied as standard\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCarrier range\u003c\/th\u003e\n      \u003ctd\u003eApproximately 6,000–10,000 lb (2.7–4.5 t)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n      \u003ctd\u003eExcavator mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility and Mounting\u003c\/h2\u003e\n\u003cp\u003eThis attachment is intended for \u003cstrong\u003eClass 3 excavator mounts\u003c\/strong\u003e and is suitable for the supplied \u003cstrong\u003e3.5–4.0 t excavator category\u003c\/strong\u003e, within the stated approximate carrier range of 6,000–10,000 lb (2.7–4.5 t). The exact mounting interface must be specified for the carrier. Confirm the excavator’s mount configuration and attachment requirements before ordering.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463593709625,"sku":"NM-3HR-36","price":3234.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/09913d26-88f5-4eef-808f-4bf3407ea681.png?v=1788822656"},{"product_id":"nm-attachments-30-class-3-root-rake-5-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-3rr-30","title":"NM Attachments - 30\" Class 3 Root Rake - 5 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-3RR-30]","description":"\u003cp\u003eThe \u003cstrong\u003eNM Attachments 3RR-30 Root Rake\u003c\/strong\u003e is a 30-inch excavator attachment designed for clearing brush, roots, trees, stumps, and other unwanted vegetation. Built from high-grade structural steel with AR-400 steel in the tine areas, this five-tine root rake is suited to demanding clearing work along fence lines, in orchards, and across areas requiring vegetation removal. Its standard CAT-style teeth configuration supports effective material engagement, while the required mount specification allows the attachment to be matched to the excavator and coupler arrangement for the intended application.\u003c\/p\u003e\n\n\u003ch2\u003eNM Attachments 30\" Class 3 Root Rake\u003c\/h2\u003e\n\n\u003cp\u003eThe 3RR-30 is intended for excavators with an operating weight of approximately \u003cstrong\u003e6,000–10,000 lb\u003c\/strong\u003e, or about 3–5 tons. Its 30-inch working width provides a compact clearing profile for work where controlled attachment size and access are important. The five-tine design helps separate and move brush, roots, and vegetation while the AR-400 steel tine areas provide material strength in the working sections of the rake.\u003c\/p\u003e\n\n\u003cp\u003eThis root rake is suitable for general site clearing, fence-line removal, orchard removal, and the movement of unwanted vegetation. Standard CAT-style teeth are fitted, and various tooth options are available. The mount or coupler must be specified when ordering because the exact hitch configuration is not universal.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e30-inch excavator root rake for compact clearing applications\u003c\/li\u003e\n  \u003cli\u003eFive-tine configuration for moving brush, roots, and vegetation\u003c\/li\u003e\n  \u003cli\u003eDesigned for clearing trees, stumps, and other unwanted vegetation\u003c\/li\u003e\n  \u003cli\u003eSuitable for fence-line and orchard removal\u003c\/li\u003e\n  \u003cli\u003eHigh-grade structural steel construction\u003c\/li\u003e\n  \u003cli\u003eAR-400 steel used in the tine areas\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style teeth configuration\u003c\/li\u003e\n  \u003cli\u003eVarious tooth options available\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators rated approximately 6,000–10,000 lb operating weight\u003c\/li\u003e\n  \u003cli\u003eMount specification required for correct fitment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe NM Attachments 3RR-30 is designed for vegetation and site-clearing tasks where a root rake is required to gather, move, and separate unwanted material. Typical applications include brush clearing, root removal, tree and stump clearing, fence-line maintenance, and orchard removal. The 30-inch width is suited to excavator work requiring a compact attachment footprint and controlled placement.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-3RR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003e3RR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator root rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eAttachment size \/ working width\u003c\/th\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTransport width\u003c\/th\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eNumber of tines\u003c\/th\u003e\n      \u003ctd\u003e5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n      \u003ctd\u003eHigh-grade structural steel with AR-400 steel in the tine areas\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth configuration\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCompatible excavator operating weight\u003c\/th\u003e\n      \u003ctd\u003e6,000–10,000 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMount requirement\u003c\/th\u003e\n      \u003ctd\u003eMount must be specified\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eExcavator Compatibility and Mounting\u003c\/h2\u003e\n\n\u003cp\u003eThis root rake is listed for excavators rated approximately \u003cstrong\u003e6,000–10,000 lb operating weight\u003c\/strong\u003e. A mount or coupler specification is required for fitment. The exact hitch or coupler variant is not identified, so the excavator mount details should be confirmed before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering Information\u003c\/h2\u003e\n\n\u003cp\u003eWhen ordering the NM Attachments 3RR-30, specify the required mount or coupler arrangement and confirm the excavator operating-weight range. Tooth options may also be available to suit the intended clearing application.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463593840697,"sku":"NM-3RR-30","price":2868.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/38dd4643-cf8d-4c95-a120-923374e883a3.png?v=1788822657"},{"product_id":"nm-attachments-class-3-frost-ripper-single-tooth-21-penetration-ar400-ripping-tine-side-wear-plates-nm-3fr-21","title":"NM Attachments - Class 3 Frost Ripper - Single Tooth, 21\" Penetration - AR400 Ripping Tine \u0026 Side Wear Plates [NM-3FR-21]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments 3FR-21 Class 3 Frost Ripper\u003c\/strong\u003e is a single-tooth excavator attachment designed for serious prying and ripping in frost or rock. With a rated penetration depth of 21 inches, the 3FR-21 combines an extra-thick AR400 steel ripping tine with AR400 side wear plates to provide a durable working tool for demanding ground conditions. It is intended for excavators rated from 6,000 to 10,000 lb operating weight and is suitable for breaking into frozen ground, working through difficult soil, and prying in rocky conditions. The mount must be specified for the excavator; a universal mount fit is not verified.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Frost and Rock\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 3FR-21 frost ripper is engineered around a single, heavy-duty ripping tooth that concentrates excavator breakout force into a narrow working point. Its 21-inch penetration specification provides substantial reach into hard or frozen ground, while the extra-thick AR400 steel tine is designed for demanding ripping applications. AR400 side wear plates add protection to the attachment’s working structure in abrasive conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe manufacturer identifies this product family for serious prying and ripping, particularly in frost or rock. This makes the 3FR-21 a practical attachment for excavation work where standard digging may be restricted by frozen or unusually resistant ground.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-tooth excavator frost ripper attachment\u003c\/li\u003e\n  \u003cli\u003e21-inch penetration depth\u003c\/li\u003e\n  \u003cli\u003eExtra-thick AR400 steel ripping tine\u003c\/li\u003e\n  \u003cli\u003eAR400 side wear plates for added wear protection\u003c\/li\u003e\n  \u003cli\u003eDesigned for serious prying and ripping in frost or rock\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style teeth configuration\u003c\/li\u003e\n  \u003cli\u003eVarious tooth options available\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators rated from 6,000 to 10,000 lb operating weight\u003c\/li\u003e\n  \u003cli\u003eMount must be specified to suit the excavator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eExcavator Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 3FR-21 is specified for excavators with an operating weight rating of 6,000–10,000 lb. Before ordering, confirm the excavator’s operating weight and provide the required mount details. The catalogue listing does not verify a universal mount fit, and the mount must be specified for the intended machine. Pin-on or quick-coupler compatibility should not be assumed without confirming the required mount configuration.\u003c\/p\u003e\n\n\u003ch2\u003eMount Requirement\u003c\/h2\u003e\n\u003cp\u003eThis product is supplied as a ripper attachment, with the mount to be specified. Confirm the excavator make, model, operating weight, and required mounting arrangement before purchase so the attachment can be configured for the intended machine. The verified product information does not define a standard hitch or universal pin-on and quick-coupler fit.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator frost ripper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003e3FR-21\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-3FR-21\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eSingle tooth\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePenetration depth\u003c\/th\u003e\n      \u003ctd\u003e21 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eRipping tine material\u003c\/th\u003e\n      \u003ctd\u003eExtra-thick AR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSide wear plate material\u003c\/th\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration standard\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth configuration\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth options\u003c\/th\u003e\n      \u003ctd\u003eVarious tooth options available\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCompatible machine class\u003c\/th\u003e\n      \u003ctd\u003eExcavators rated 6,000–10,000 lb operating weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMount\u003c\/th\u003e\n      \u003ctd\u003eMust be specified\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePrimary application\u003c\/th\u003e\n      \u003ctd\u003eSerious prying and ripping, particularly in frost or rock\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463594889273,"sku":"NM-3FR-21","price":1412.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/0a3513c8-7e7b-4553-8f0f-ccfbf82e4527.png?v=1788822662"},{"product_id":"nm-attachments-42-class-6-root-rake-5-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-6rr-42","title":"NM Attachments - 42\" Class 6 Root Rake - 5 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-6RR-42]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments 6RR-42 42\" Class 6 Root Rake\u003c\/strong\u003e is an excavator attachment designed for brush, roots, stumps, fence-line clearing, and general land-clearing work. With a verified 42-inch working width, the 6RR-42 is intended for excavators rated approximately 12,000–14,000 lb operating weight, corresponding to an approximate 6–7 ton machine class. Its root-rake design helps separate and clear unwanted vegetation and ground debris, while the NM Attachments RR-series product description identifies AR-400 steel for the tine areas and standard CAT-style teeth for the series. The mount must be specified to match the excavator’s OEM coupler.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Excavator Land-Clearing Applications\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 6RR-42 is suited to jobs where brush, roots, stumps, and accumulated debris need to be gathered, separated, or removed. Its 42-inch width provides a focused working area for clearing along fence lines, working around obstacles, and handling targeted land-clearing tasks with an appropriately sized excavator.\u003c\/p\u003e\n\n\u003cp\u003eThe attachment is classified for use with excavators in the 12,000–14,000 lb range, or approximately 6–7 tons. Confirm the excavator’s operating weight and attachment compatibility before ordering. Because coupler configurations vary, the mount specification must be selected to match the OEM coupler on the machine.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e42-inch verified working width.\u003c\/li\u003e\n  \u003cli\u003eDesigned for brush, roots, stumps, fence-line clearing, and land clearing.\u003c\/li\u003e\n  \u003cli\u003eCompatible with excavators rated approximately 12,000–14,000 lb operating weight.\u003c\/li\u003e\n  \u003cli\u003eIntended for an approximate 6–7 ton excavator class.\u003c\/li\u003e\n  \u003cli\u003eAR-400 steel is identified for the tine areas in the NM Attachments RR-series product description.\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style teeth are described for the RR series.\u003c\/li\u003e\n  \u003cli\u003eOEM mount and coupler specification is required for correct machine fitment.\u003c\/li\u003e\n  \u003cli\u003eModel: 6RR-42.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eClearing Performance and Use Cases\u003c\/h2\u003e\n\u003cp\u003eThe root-rake format is intended for material-handling and clearing work rather than general-purpose excavation. It can be used for brush and root removal, stump-related clearing, fence-line maintenance, and broader land-clearing tasks. The 42-inch width supports controlled operation where a narrower attachment is preferred for concentrated work areas.\u003c\/p\u003e\n\n\u003cp\u003eAR-400 steel is identified for the tine areas at the RR-series level. This material description applies to the series product information and is included as a series-level feature. The available exact-model information does not specify a tine count for the 6RR-42, so the tine configuration should be confirmed when finalizing the attachment and mount specification.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003e6RR-42\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator root rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e42 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTransport width\u003c\/th\u003e\n      \u003ctd\u003e42 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCompatible machine weight\u003c\/th\u003e\n      \u003ctd\u003e12,000–14,000 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCompatible machine class\u003c\/th\u003e\n      \u003ctd\u003eApproximately 6–7 tons\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine-area material\u003c\/th\u003e\n      \u003ctd\u003eAR-400 steel identified at the RR-series level\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth description\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth described for the RR series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMount\u003c\/th\u003e\n      \u003ctd\u003eMount specification required; match the excavator OEM coupler\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eExcavator Compatibility and Mount Requirements\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 6RR-42 is intended for excavators rated approximately 12,000–14,000 lb operating weight, within an approximate 6–7 ton class. The attachment mount must be specified to suit the excavator’s OEM coupler. Verify the machine class, operating weight, and coupler configuration before purchase to ensure the correct mount specification is supplied.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595118649,"sku":"NM-6RR-42","price":3737.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/a26e688f-0f03-4b9a-ae67-f6a8bf0c329a.png?v=1788822662"},{"product_id":"nm-attachments-class-8-frost-ripper-single-tooth-30-penetration-ar400-ripping-tine-side-wear-plates-nm-8fr-30","title":"NM Attachments - Class 8 Frost Ripper - Single Tooth, 30\" Penetration - AR400 Ripping Tine \u0026 Side Wear Plates [NM-8FR-30]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments 8FR-30 Class 8 Frost Ripper\u003c\/strong\u003e is a single-tooth excavator attachment built for serious prying and ripping in frost or rock. With a listed penetration depth of 30 inches, this frost ripper provides a concentrated ripping point for breaking through difficult ground conditions. Its extra-thick AR400 steel ripping tine and AR400 side wear plates are designed for demanding excavation work, while the standard CAT-style tooth configuration supports practical tooth selection, with various tooth options available. The 8FR-30 is intended for excavators in approximately the 7–12 ton class, or machines with an operating weight of 14,000–24,000 lb, and can be mounted using a pin-on connection or quick coupler.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Frost and Rock Ripping\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments Frost Ripper family is designed for applications where concentrated force is needed to pry and rip through frost or rock. The single-tooth configuration directs the excavator’s breakout force into one heavy-duty ripping tine, helping address tough ground that may be difficult to penetrate with conventional digging attachments.\u003c\/p\u003e\n\n\u003cp\u003eThe 8FR-30 model provides a 30-inch penetration depth and uses an extra-thick AR400 steel ripping tine supported by AR400 side wear plates. This construction is suited to demanding ground-engagement work where the attachment is exposed to abrasion and high loading during prying and ripping operations.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-tooth excavator frost ripper configuration\u003c\/li\u003e\n  \u003cli\u003e30-inch listed penetration depth\u003c\/li\u003e\n  \u003cli\u003eExtra-thick AR400 steel ripping tine\u003c\/li\u003e\n  \u003cli\u003eAR400 side wear plates for added wear protection\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style tooth configuration\u003c\/li\u003e\n  \u003cli\u003eVarious tooth options available\u003c\/li\u003e\n  \u003cli\u003eDesigned for prying and ripping in frost or rock\u003c\/li\u003e\n  \u003cli\u003ePin-on or quick-coupler mounting\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators in the approximately 7–12 ton class\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eExcavator Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe exact 8FR-30 model is listed for excavators with an operating weight of 14,000–24,000 lb, approximately equivalent to the 7–12 ton class. Confirm the excavator’s operating weight, attachment interface, and tooth configuration before ordering to ensure the ripper is suitable for the intended machine.\u003c\/p\u003e\n\n\u003ch2\u003eMounting and Tooth Configuration\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 8FR-30 can be supplied for pin-on or quick-coupler mounting. It uses a standard CAT-style tooth configuration, and various tooth options are available. The mounting arrangement and tooth option should be matched to the excavator and application requirements.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator frost ripper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003e8FR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePart number\u003c\/th\u003e\n      \u003ctd\u003e8FR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConfiguration\u003c\/th\u003e\n      \u003ctd\u003eSingle tooth\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePenetration depth\u003c\/th\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n      \u003ctd\u003eAR400-grade steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eRipping tine\u003c\/th\u003e\n      \u003ctd\u003eExtra-thick AR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSide wear plates\u003c\/th\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style; various tooth options available\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMount type\u003c\/th\u003e\n      \u003ctd\u003ePin-on or quick coupler\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eRecommended excavator size\u003c\/th\u003e\n      \u003ctd\u003e14,000–24,000 lb operating weight; approximately 7–12 tons\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-8FR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cp\u003eThe 8FR-30 is suited to excavator work involving frost and rock ripping, concentrated prying, and breaking through difficult ground. Its 30-inch penetration capability and reinforced AR400 construction make it a practical choice for operators seeking a dedicated ripping attachment for demanding excavation conditions.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595282489,"sku":"NM-8FR-30","price":2841.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/8e727486-d54d-41d3-be63-5b9c30ca4418.png?v=1788822664"},{"product_id":"nm-attachments-48-class-8-root-rake-5-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-8rr-48","title":"NM Attachments - 48\" Class 8 Root Rake - 5 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-8RR-48]","description":"\u003cp\u003eClear brush, roots, stumps and similar debris with the \u003cstrong\u003eNM Attachments 8RR-48 48-inch Class 8 Root Rake\u003c\/strong\u003e. Built for excavators in the 14,000–24,000 lb machine-size class, this five-tine root rake provides a practical attachment for land clearing, fence-line cleanup, orchard removal and related site-preparation work. Its 48-inch working width offers a focused clearing path, while AR-400 steel in the tine areas is specified for demanding contact with roots and other ground debris. The mounting configuration must be specified to match the excavator.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments 8RR-48 is an excavator root rake designed to help move and separate brush, trees, stumps, roots and similar debris during clearing operations. Its five-tine configuration provides open spacing for engaging and handling unwanted vegetation and material, making it suitable for targeted work along fence lines, in orchards and across areas requiring brush or root removal.\u003c\/p\u003e\n\n\u003cp\u003eWith a 48-inch attachment width, the root rake is sized for excavators in the approximately Class 8 machine category. The attachment is intended for machines weighing between 14,000 and 24,000 lb. Before ordering, confirm the required mounting configuration, as the mount is not included in the catalogue listing and must be specified for the excavator.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e48-inch working width:\u003c\/strong\u003e Provides a focused clearing path for excavator-based land management and site preparation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive-tine design:\u003c\/strong\u003e Configured for engaging brush, roots, stumps, trees and similar debris.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAR-400 steel tine areas:\u003c\/strong\u003e AR-400 steel is used in the tine areas for demanding clearing applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass 8 excavator compatibility:\u003c\/strong\u003e Intended for excavators in the 14,000–24,000 lb machine-size class.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile clearing applications:\u003c\/strong\u003e Suitable for brush removal, root clearing, fence-line work and orchard removal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecified mounting configuration:\u003c\/strong\u003e The mount must be specified to suit the excavator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe 8RR-48 is designed for moving brush, trees, stumps and similar debris. Its root-rake configuration can be used for fence-line clearing, orchard removal and other excavator tasks where vegetation, roots and unwanted material need to be gathered or moved. The 48-inch width supports controlled work in defined clearing areas while remaining matched to the intended excavator size class.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-8RR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eManufacturer model \/ part number\u003c\/th\u003e\n      \u003ctd\u003e8RR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct category\u003c\/th\u003e\n      \u003ctd\u003eExcavator root rake attachment\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eAttachment width\u003c\/th\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eNumber of tines\u003c\/th\u003e\n      \u003ctd\u003e5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine-area material\u003c\/th\u003e\n      \u003ctd\u003eAR-400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eIntended machine size\u003c\/th\u003e\n      \u003ctd\u003e14,000–24,000 lb excavators\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMounting requirement\u003c\/th\u003e\n      \u003ctd\u003eMount must be specified\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eExcavator Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis root rake is specified for excavators in the \u003cstrong\u003e14,000–24,000 lb machine-size class\u003c\/strong\u003e, approximately Class 8. Confirm that the excavator falls within this machine-size range before purchase.\u003c\/p\u003e\n\n\u003ch2\u003eMounting Requirement\u003c\/h2\u003e\n\u003cp\u003eThe mounting configuration is not included in the catalogue listing and must be specified. Confirm the required mount for the intended excavator before ordering so the attachment can be matched to the machine.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595348025,"sku":"NM-8RR-48","price":4611.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/6d915d92-4f48-4743-af8a-f01608d0367a.png?v=1788822664"},{"product_id":"nm-attachments-60-class-8-root-rake-7-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-8rr-60","title":"NM Attachments - 60\" Class 8 Root Rake - 7 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-8RR-60]","description":"\u003cp\u003eThe \u003cstrong\u003eNM-Attachments NM-8RR-60 Class 8 Root Rake\u003c\/strong\u003e is a 60-inch excavator attachment designed for clearing brush, roots, trees, stumps, fence lines, and orchard areas. Built from high-grade structural steel with AR400 steel in the tine areas, this root rake is made for demanding ground-clearance work where durable tine sections and effective material separation are important. The NM-8RR-60 variant features seven tines and a standard CAT-style teeth configuration, making it a practical choice for approximately 8.0-ton Class 8 excavators used in land clearing, site preparation, vegetation removal, and property maintenance.\u003c\/p\u003e\n\n\u003ch2\u003eProduct Highlights\u003c\/h2\u003e\n\u003cp\u003eThe NM-Attachments Root Rake is designed to help excavator operators move unwanted vegetation and ground debris while working along fence lines, in orchards, and across areas requiring brush, tree, or stump removal. Its structural steel construction supports general attachment durability, while AR400 steel in the tine areas provides a hardened material specification in the sections that engage the ground and collected material.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for brush, tree, stump, fence-line, and orchard removal\u003c\/li\u003e\n  \u003cli\u003e60-inch working width for the NM-8RR-60 variant\u003c\/li\u003e\n  \u003cli\u003eSeven-tine configuration\u003c\/li\u003e\n  \u003cli\u003eHigh-grade structural steel construction\u003c\/li\u003e\n  \u003cli\u003eAR400 steel in the tine areas\u003c\/li\u003e\n  \u003cli\u003eStandard CAT-style teeth configuration\u003c\/li\u003e\n  \u003cli\u003eVarious teeth options are available within the Root Rake range\u003c\/li\u003e\n  \u003cli\u003eIntended for Class 8 excavator applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt for Clearing and Removal Work\u003c\/h2\u003e\n\u003cp\u003eRoot rakes are suited to projects where unwanted brush, trees, stumps, and similar material must be gathered or moved. The NM-8RR-60 can support clearing work along fence lines and in orchard environments, as well as general vegetation and site-cleanup applications. Its 60-inch working width provides a defined coverage area for attachment operations, while the seven-tine layout is specified for this Class 8 variant.\u003c\/p\u003e\n\n\u003ch2\u003eDurable Tine-Area Construction\u003c\/h2\u003e\n\u003cp\u003eThe attachment combines high-grade structural steel with AR400 steel in the tine areas. This construction is intended for the working portions of the rake that contact brush, roots, and other cleared material. The NM-Attachments Root Rake family uses a standard CAT-style teeth configuration, with various teeth options available across the range.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and Application\u003c\/h2\u003e\n\u003cp\u003eThe NM-8RR-60 is identified for use with a \u003cstrong\u003eClass 8 excavator\u003c\/strong\u003e, approximately an \u003cstrong\u003e8.0-ton excavator\u003c\/strong\u003e. Confirm the excavator’s attachment interface and suitability before purchase or installation. Hydraulic requirements, hitch specifications, attachment weight, and transport dimensions are not specified for this product listing.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM-Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator root rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003eNM-8RR-60\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eExcavator class\u003c\/th\u003e\n      \u003ctd\u003eClass 8 excavator \/ approximately 8.0 t excavator\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e60 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine count\u003c\/th\u003e\n      \u003ctd\u003e7 tines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n      \u003ctd\u003eHigh-grade structural steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine-area material\u003c\/th\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTeeth configuration\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth configuration\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePrimary applications\u003c\/th\u003e\n      \u003ctd\u003eBrush, tree, stump, fence-line, and orchard removal\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eProduct Code\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNM-8RR-60\u003c\/strong\u003e\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595839545,"sku":"NM-8RR-60","price":5746.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/ed3b5bd5-aad2-4406-90d8-1a9f2644aab7.png?v=1788822667"},{"product_id":"nm-attachments-class-6-frost-ripper-single-tooth-24-penetration-ar400-ripping-tine-side-wear-plates-nm-6fr-24","title":"NM Attachments - Class 6 Frost Ripper - Single Tooth, 24\" Penetration - AR400 Ripping Tine \u0026 Side Wear Plates [NM-6FR-24]","description":"\u003cp\u003eThe \u003cstrong\u003eNM Attachments Class 6 Frost Ripper - Single Tooth, 24\" Penetration\u003c\/strong\u003e is an excavator attachment designed for serious prying and ripping in frost or rock. Configuration \u003cstrong\u003eNM-6FR-24\u003c\/strong\u003e features a single ripping tooth with 24-inch penetration, an extra-thick AR400 steel ripping tine, and AR400 steel side wear plates for demanding ground-engagement work. Its standard CAT-style teeth configuration supports a durable, serviceable ripping setup for excavator applications where breaking through frozen or difficult material is required.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Frost and Rock Ripping\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments Frost Ripper is intended for challenging excavation conditions that require concentrated force at a single point. The single-tooth design focuses the excavator’s breakout and crowd force into the ripping tine, helping tackle frost, rock, and other difficult ground conditions. As a Width Class 6 configuration with 24-inch penetration, the 6FR-24 model is suited to applications requiring substantial digging depth and focused prying capability.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass 6 configuration:\u003c\/strong\u003e Identified as Width Class 6 and model 6FR-24.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-tooth design:\u003c\/strong\u003e Provides a concentrated ripping point for prying and breaking difficult ground.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e24-inch penetration:\u003c\/strong\u003e Configured for penetration up to 24 inches.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtra-thick AR400 ripping tine:\u003c\/strong\u003e Built with AR400 steel for demanding ripping service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAR400 side wear plates:\u003c\/strong\u003e Adds wear-resistant protection to the attachment sides.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard CAT-style teeth configuration:\u003c\/strong\u003e Uses a standard CAT-style teeth configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcavator attachment:\u003c\/strong\u003e Intended for use with compatible excavators selected by brand and model.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVarious teeth options available:\u003c\/strong\u003e The manufacturer identifies various teeth options for the Frost Ripper range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis frost ripper is designed for serious prying and ripping work, particularly in frozen ground and rock. Its single-point configuration is suitable for breaking into hard material before excavation, loosening frost-bound ground, and concentrating excavator force where a broad digging attachment may not provide the required point loading. The AR400 ripping tine and side wear plates are specified for the demanding conditions associated with ground-engagement work.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator frost ripper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-6FR-24\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConfiguration\/model\u003c\/th\u003e\n      \u003ctd\u003e6FR-24\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWidth class\u003c\/th\u003e\n      \u003ctd\u003eWidth Class 6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth configuration\u003c\/th\u003e\n      \u003ctd\u003eSingle tooth\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePenetration\u003c\/th\u003e\n      \u003ctd\u003e24 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eRipping tine material\u003c\/th\u003e\n      \u003ctd\u003eExtra-thick AR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSide wear plate material\u003c\/th\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTooth system\u003c\/th\u003e\n      \u003ctd\u003eStandard CAT-style teeth configuration\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eConfiguration price\u003c\/th\u003e\n      \u003ctd\u003e+$2,211.00\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eExcavator Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe NM-6FR-24 is an excavator attachment. Exact machine compatibility must be selected by excavator brand and model on the manufacturer product page. The supplied configuration does not specify a single machine model, mounting dimension, or hitch dimension, so compatibility should be confirmed before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eMounting and Teeth\u003c\/h2\u003e\n\u003cp\u003eThis configuration uses a standard CAT-style teeth configuration. Exact mounting and hitch dimensions are not specified for the NM-6FR-24 configuration. Various teeth options are available within the Frost Ripper range; the selected excavator brand and model should be used to confirm the correct attachment configuration.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595905081,"sku":"NM-6FR-24","price":2211.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/9f2a2a29-bc0a-45ce-a892-c9605a79229c.png?v=1788822667"},{"product_id":"nm-attachments-48-class-6-root-rake-6-tines-ar400-tine-areas-for-brush-roots-fence-line-clearing-nm-6rr-48","title":"NM Attachments - 48\" Class 6 Root Rake - 6 Tines - AR400 Tine Areas for Brush, Roots \u0026 Fence-Line Clearing [NM-6RR-48]","description":"\u003cp\u003eThe \u003cstrong\u003eNM-Attachments 6RR-48 Class 6 Root Rake\u003c\/strong\u003e is a 48-inch excavator attachment built for aggressive land clearing, vegetation removal, and debris handling. Featuring six tines with AR400 steel in the tine areas, this root rake is designed to work through brush, roots, stumps, fence lines, and general site debris. Its compact 48-inch working width suits excavators in the 12,000–14,000 lb machine-size class, or approximately 6–7 tons, making it a practical choice for property maintenance, land reclamation, right-of-way work, and construction-site cleanup.\u003c\/p\u003e\n\n\u003ch2\u003eNM-Attachments 6RR-48 Root Rake\u003c\/h2\u003e\n\n\u003cp\u003eThe 6RR-48 is part of the NM Attachments RR Series and is configured with six tines across a 48-inch working width. The tine areas use AR400 steel, providing a material specification suited to demanding contact with roots, brush, stumps, and other ground debris. The rake design helps separate and collect unwanted vegetation and debris while allowing soil and smaller material to fall through the tine spacing.\u003c\/p\u003e\n\n\u003cp\u003eUse the root rake for clearing brush, removing roots and stumps, cleaning fence lines, handling vegetation, and gathering debris during excavation and land-clearing work. Standard CAT-style teeth are listed for the RR Series. The excavator mount type must be specified to ensure the attachment is configured for proper fit with the OEM coupler.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e48-inch working width:\u003c\/strong\u003e Provides a focused clearing width for excavator work in confined or moderately sized areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSix tines:\u003c\/strong\u003e Configured to engage brush, roots, stumps, and debris during land-clearing operations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAR400 tine areas:\u003c\/strong\u003e Uses AR400 steel in the tine areas for demanding ground-contact applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt for land clearing:\u003c\/strong\u003e Designed for brush, roots, stumps, fence-line clearing, vegetation removal, and debris handling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcavator attachment:\u003c\/strong\u003e Intended for excavators in the 12,000–14,000 lb class, approximately 6–7 tons.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRR Series configuration:\u003c\/strong\u003e Model 6RR-48 corresponds to the six-tine, 48-inch root rake variant.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard CAT-style teeth:\u003c\/strong\u003e Listed for the RR Series.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM coupler consideration:\u003c\/strong\u003e Mount type must be specified for proper compatibility with the excavator’s coupler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eThe NM-Attachments 6RR-48 is suited to clearing and cleanup tasks where vegetation, roots, and loose debris must be gathered or removed with an excavator. Typical applications include brush clearing, root removal, stump-area cleanup, fence-line maintenance, vegetation removal, debris handling, and general land preparation. The 48-inch width offers a balance between coverage and maneuverability for excavators in its recommended machine class.\u003c\/p\u003e\n\n\u003ch2\u003eExcavator Compatibility and Mount Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThis root rake is recommended for excavators with a machine size of \u003cstrong\u003e12,000–14,000 lb\u003c\/strong\u003e, corresponding to an approximate \u003cstrong\u003e6–7 ton excavator class\u003c\/strong\u003e. Compatibility depends on the excavator’s coupler arrangement. The mount type must be specified to obtain the correct fit for the OEM coupler. Confirm the required mount specification before ordering or installation.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eSpecification\u003c\/th\u003e\n      \u003cth scope=\"row\"\u003eDetails\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBrand\u003c\/td\u003e\n      \u003ctd\u003eNM-Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct type\u003c\/td\u003e\n      \u003ctd\u003eExcavator root rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModel \/ variant\u003c\/td\u003e\n      \u003ctd\u003e6RR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProduct code\u003c\/td\u003e\n      \u003ctd\u003eNM-6RR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWorking width\u003c\/td\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTransport width\u003c\/td\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNumber of tines\u003c\/td\u003e\n      \u003ctd\u003e6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTine-area material\u003c\/td\u003e\n      \u003ctd\u003eAR400 steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended machine size\u003c\/td\u003e\n      \u003ctd\u003e12,000–14,000 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eApproximate machine class\u003c\/td\u003e\n      \u003ctd\u003e6–7 tons\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMount type\u003c\/td\u003e\n      \u003ctd\u003eExcavator mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMount requirement\u003c\/td\u003e\n      \u003ctd\u003eMount type must be specified for proper fit with the OEM coupler\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTeeth\u003c\/td\u003e\n      \u003ctd\u003eStandard CAT-style teeth listed for the RR Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463595970617,"sku":"NM-6RR-48","price":4005.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/89bdb79a-97f2-451b-9019-c5dab9cc3a75.png?v=1788822668"},{"product_id":"nm-attachments-30-class-3-hybrid-rake-5-tines-root-rake-design-with-sifting-crossbars-replaceable-teeth-nm-3hr-30","title":"NM Attachments - 30\" Class 3 Hybrid Rake - 5 Tines - Root-Rake Design with Sifting Crossbars \u0026 Replaceable Teeth [NM-3HR-30]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments NM3HR-30 30\" Class 3 Hybrid Rake\u003c\/strong\u003e is an excavator attachment designed for root-rake work and material sifting during fence-row clearing and general land-clearing operations. Its five-tine root-rake design helps remove roots, limbs, brush, rocks, and other unwanted debris while allowing soil to remain in place. Built for excavators and carriers in the Class 3, 6,000–10,000 lb range, this 30-inch hybrid rake combines conventional raking functionality with sifting capability for more selective site cleanup.\u003c\/p\u003e\n\n\u003ch2\u003eRoot-Rake and Sifting Functionality\u003c\/h2\u003e\n\u003cp\u003eThe NM3HR-30 combines standard root-rake features with the ability to sift unwanted rocks and debris. This makes it suitable for clearing vegetation and loose obstructions while helping retain usable soil rather than moving all site material indiscriminately. The attachment is intended for fence-row maintenance, general land clearing, and similar excavator work where roots, brush, limbs, rocks, and debris need to be separated from the soil.\u003c\/p\u003e\n\n\u003cp\u003eWith five tines across a 30-inch working width, the rake provides a focused working area for Class 3 excavator carriers. The supplied product name identifies the design as including sifting crossbars and replaceable teeth.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e30-inch working width for focused excavator attachment work\u003c\/li\u003e\n  \u003cli\u003eClass 3 hybrid rake configuration\u003c\/li\u003e\n  \u003cli\u003eFive-tine root-rake design\u003c\/li\u003e\n  \u003cli\u003eCombines root-rake functionality with sifting capability\u003c\/li\u003e\n  \u003cli\u003eDesigned to help remove roots, limbs, brush, rocks, and debris while leaving soil in place\u003c\/li\u003e\n  \u003cli\u003eSuitable for fence-row and general land-clearing work\u003c\/li\u003e\n  \u003cli\u003eSupplied product designation identifies sifting crossbars and replaceable teeth\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators and carriers weighing 6,000–10,000 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe NM3HR-30 is intended for land-clearing tasks where the operator needs to rake through material and separate unwanted debris from soil. Typical supported applications include fence-row clearing, root removal, brush and limb cleanup, and the removal of rocks and other debris from a work area. Its hybrid design is suited to jobs requiring both raking and sifting rather than simple surface-level material movement.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003eNM3HR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator hybrid rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e30 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine count\u003c\/th\u003e\n      \u003ctd\u003e5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eDesign\u003c\/th\u003e\n      \u003ctd\u003eRoot-rake design with sifting capability\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCarrier class\u003c\/th\u003e\n      \u003ctd\u003eClass 3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCarrier weight range\u003c\/th\u003e\n      \u003ctd\u003e6,000–10,000 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMount type\u003c\/th\u003e\n      \u003ctd\u003eExcavator mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-3HR-30\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility and Mounting\u003c\/h2\u003e\n\u003cp\u003eThis hybrid rake is intended for excavators and carriers in the Class 3 range, specifically those weighing between 6,000 and 10,000 lb. It uses an excavator mount. The exact coupler or mount configuration is not specified, so confirm the required mounting arrangement before ordering to ensure compatibility with the intended carrier.\u003c\/p\u003e\n\n\u003ch2\u003eTractor and Carrier Requirements\u003c\/h2\u003e\n\u003cp\u003eThe NM3HR-30 is an excavator attachment rather than a tractor-mounted implement. Use it with a compatible Class 3 excavator or carrier within the stated 6,000–10,000 lb weight range. No PTO or hydraulic flow requirements are specified for this product.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463596822585,"sku":"NM-3HR-30","price":3164.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/6f4234e1-098c-4f34-8d6a-04098afabd07.png?v=1788822672"},{"product_id":"nm-attachments-42-class-6-hybrid-rake-5-tines-root-rake-design-with-sifting-crossbars-replaceable-teeth-nm-6hr-42","title":"NM Attachments - 42\" Class 6 Hybrid Rake - 5 Tines - Root-Rake Design with Sifting Crossbars \u0026 Replaceable Teeth [NM-6HR-42]","description":"\u003cp\u003e\u003cstrong\u003eNM Attachments 42\" Class 6 Hybrid Rake – NM-6HR-42\u003c\/strong\u003e is a five-tine excavator attachment designed to combine root-rake functionality with integrated screening and sifting capability. Built for excavators in the 12,000–14,000 lb carrier class, this hybrid rake helps clear roots, limbs, brush, rocks, and other debris while retaining soil in place. Its 42-inch working width provides a focused footprint for excavation-site cleanup, land clearing, root removal, and material separation tasks where controlled raking and sifting are required.\u003c\/p\u003e\n\n\u003ch2\u003eHybrid Raking and Sifting Function\u003c\/h2\u003e\n\u003cp\u003eThe NM-6HR-42 combines the open working action of a root rake with crossbar-based screening functionality. This allows operators to work through unwanted vegetation, roots, rocks, and debris while helping soil pass through the attachment rather than removing it unnecessarily. The five-tine configuration provides a practical balance between material engagement and separation for Class 6 excavator applications.\u003c\/p\u003e\n\n\u003cp\u003eUse the rake for clearing brush and limbs, removing roots, collecting rocks, and preparing areas for further grading or site work. The compact 42-inch width is suited to targeted work around construction areas, wooded ground, landscaping projects, and other locations where a narrower excavator attachment is beneficial.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e42-inch working and transport width.\u003c\/li\u003e\n  \u003cli\u003eFive-tine configuration for Class 6 excavators.\u003c\/li\u003e\n  \u003cli\u003eRoot-rake design for engaging roots, brush, limbs, rocks, and debris.\u003c\/li\u003e\n  \u003cli\u003eIntegrated sifting and screening function to help separate unwanted material while retaining soil.\u003c\/li\u003e\n  \u003cli\u003eDesigned for excavators in the 12,000–14,000 lb carrier class.\u003c\/li\u003e\n  \u003cli\u003eSuitable for clearing, root removal, rock removal, debris handling, and site preparation tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments Hybrid Rake is intended for clearing roots, limbs, brush, and rocks while leaving soil in place. Its hybrid design supports work that requires more than simple collection: operators can rake through material, gather unwanted debris, and use the screening function to assist with separation. This makes it useful for excavation cleanup, vegetation removal, rough site preparation, and general land-clearing work performed with a compatible Class 6 excavator.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator hybrid rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eManufacturer model \/ catalogue code\u003c\/th\u003e\n      \u003ctd\u003eNM6HR-42\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-6HR-42\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n      \u003ctd\u003e42 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eTine configuration\u003c\/th\u003e\n      \u003ctd\u003e5 tines\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCarrier compatibility\u003c\/th\u003e\n      \u003ctd\u003eClass 6 excavators; 12,000–14,000 lb carriers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003ePrimary function\u003c\/th\u003e\n      \u003ctd\u003eRoot-raking with sifting and screening capability\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eExcavator Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis attachment is intended for Class 6 excavators in the 12,000–14,000 lb carrier range. The exact coupler or pin-on configuration has not been specified, so confirm the excavator’s mounting arrangement and attachment interface before ordering. Proper compatibility should also be checked against the excavator and attachment manufacturer requirements.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463596920889,"sku":"NM-6HR-42","price":4067.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/8a1e64c6-4516-4171-9797-62bff9e3411e.png?v=1788822672"},{"product_id":"nm-attachments-48-class-6-hybrid-rake-6-tines-root-rake-design-with-sifting-crossbars-replaceable-teeth-nm-6hr-48","title":"NM Attachments - 48\" Class 6 Hybrid Rake - 6 Tines - Root-Rake Design with Sifting Crossbars \u0026 Replaceable Teeth [NM-6HR-48]","description":"\u003cp\u003eThe \u003cstrong\u003eNM Attachments 48\" Class 6 Hybrid Rake\u003c\/strong\u003e combines root-rake and sifting-bucket functions in one excavator-mounted attachment. Model \u003cstrong\u003eNM6HR-48\u003c\/strong\u003e is designed for Class 6 excavator carriers in the 12,000–14,000 lb operating range, helping clear roots, limbs, brush, rocks, and other unwanted debris while leaving soil behind. With a 48-inch working width and six tines, it is suited to land clearing, site cleanup, and material separation tasks where controlled debris removal is required.\u003c\/p\u003e\n\n\u003ch2\u003eEfficient Root and Debris Removal\u003c\/h2\u003e\n\u003cp\u003eThe NM-6HR-48 uses a root-rake design to engage and remove embedded roots, brush, limbs, and rocks from the work area. Its sifting capability helps separate unwanted debris from soil, allowing soil to remain on site while larger material is collected or moved. This combination provides the functionality of a root rake and a sifting bucket in a single attachment.\u003c\/p\u003e\n\n\u003cp\u003eAs an excavator-mounted hybrid rake, the attachment is intended for use with compatible Class 6 carriers. Its six-tine configuration supports ground engagement during clearing operations, while the sifting function helps process mixed material containing soil and unwanted debris.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e48-inch working width for excavator-mounted clearing and sifting applications\u003c\/li\u003e\n  \u003cli\u003eDesigned for Class 6 excavator carriers\u003c\/li\u003e\n  \u003cli\u003eCompatible with carriers in the 12,000–14,000 lb operating range\u003c\/li\u003e\n  \u003cli\u003eSix-tine root-rake configuration\u003c\/li\u003e\n  \u003cli\u003eCombines root-rake functions with sifting capability\u003c\/li\u003e\n  \u003cli\u003eDesigned to remove roots, limbs, brush, rocks, and other unwanted debris\u003c\/li\u003e\n  \u003cli\u003eHelps leave soil behind during clearing and sifting operations\u003c\/li\u003e\n  \u003cli\u003eExcavator mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe NM Attachments Hybrid Rake is designed for clearing and cleanup work where roots, brush, rocks, limbs, and other debris need to be removed from soil. It can be used for excavator-based land clearing, site preparation, root removal, brush cleanup, and general debris separation. By combining raking and sifting functions, the attachment helps reduce the need to change between separate tools during compatible clearing tasks.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n      \u003ctd\u003eNM Attachments\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n      \u003ctd\u003eExcavator hybrid rake\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n      \u003ctd\u003eNM6HR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eProduct code\u003c\/th\u003e\n      \u003ctd\u003eNM-6HR-48\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eWorking width\u003c\/th\u003e\n      \u003ctd\u003e48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eAttachment class\u003c\/th\u003e\n      \u003ctd\u003eClass 6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eNumber of tines\u003c\/th\u003e\n      \u003ctd\u003e6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n      \u003ctd\u003eExcavator mount\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003cth scope=\"row\"\u003eCompatible carrier range\u003c\/th\u003e\n      \u003ctd\u003e12,000–14,000 lb carriers\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCarrier Compatibility\u003c\/h2\u003e\n\u003cp\u003eThis hybrid rake is intended for \u003cstrong\u003eClass 6 excavator carriers\u003c\/strong\u003e in the \u003cstrong\u003e12,000–14,000 lb carrier operating range\u003c\/strong\u003e. Confirm that the excavator is within the specified carrier range and is equipped for the attachment’s excavator mount before purchase or installation.\u003c\/p\u003e","brand":"NM-Attachments","offers":[{"title":"Default Title","offer_id":46463597117497,"sku":"NM-6HR-48","price":4335.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/8428\/2425\/files\/66bd173c-05bd-4539-9a08-b14a39504dd5.png?v=1788822674"}],"url":"https:\/\/shop.timberstar.ca\/collections\/nm-excavator-rakes-frost-rippers.oembed","provider":"Timberstar Tractor","version":"1.0","type":"link"}